Install Printer Drivers
Insert the Zebra Setup Disk that came with your Zebra printer into your computer's CD-ROM drive and follow the installation instructions, per the Zebra User manual.
Plug in the printer using the USB cable connection (recommended).
Configure the Procare Checkin program
Set the
Checkin Program Options in the Checkin Program, Hardware section for the Zebra printer (see related video above).
Reset Zebra Printer
If you have problems getting the printer to work correctly with the Procare Checkin program, you can perform a Reset procedure with the Zebra Setup program as follows:
- Download and Run the Zebra Program.
- Accept the default settings when you are installing it. If you get a message about older drivers, just click on Finish.
Note: It is recommended to choose the USB cable connection option, though you may use any printer port available on your computer, such as Parallel, Serial, etc.
- When you click Finish, you will have a screen that looks like this:
- Click on Open Printer Tools.
- Click on the Action tab.
- Select Reset Printer, then click Send
- Select Switch to Page Mode then Click Send, then click Close twice to close out of the Program.
tags: zebra, zebra printer, receipt printer, 2 inch printer, 4 inch printer, 2" printer, 4" printer.