Before You Begin

You must have multiple locations set up in the Regions & Schools section of System Configuration. In other words, you must have a single database divided into various school locations. The steps below are not compatible with a situation where you have a separate database installation at each physical location.

Add Person Using the Same Primary School

You'll need to choose one location as the Primary School for an employee who works at more than one location.

1. Log in to the school that will be the primary location for this person.
   1. Add the employee as a New Person.

   

   2. Go to their Information & Relationships screen and assign this location as their Primary School. You'll also want to assign a Primary Work Area - the classroom or place they normally work at this location.
   3. Assign a Pay Rate. The Pay Codes/Rates for this person are all managed here, at their primary location.
   4. Be sure their Work History screen shows they are Currently Employed at this location.
       
2. Return to the Procare Home screen and use the Change School button to select another location at which this person works.
   1. This time add the employee as an Existing Person.

   

   2. Assign the original location as their Primary School on the Information & Relationships screen. In other words no matter how many locations this person works at their Primary School will always be the same. You'll also want to assign a Primary Work Area - the classroom or place they normally work at this location.
   3. Be sure their Work History screen shows they are Currently Employed at this location too.
   4. Repeat for any other locations as needed.

Time Cards for All Hours

You may choose  to view or print a time card that includes hours from all locations.

1. Log in to the school that is the primary location for the employee.
2. Go to the Employee Time Card. Although times displayed on screen will be for the current location only, you may print a time sheet from the Reports button (bottom of screen) which automatically includes times from all locations. The school code shown for each entry (like S1 or S2) will indicate the location.

Note: If you view their time card from another location (one that is not their Primary School) you'll see only hours for that one location - both on the time card itself and on the report. The phrase "borrowed employee" (on the report) is used to indicate this is NOT their primary location.

keyword tags: two locations, two schools, 2 schools, two time cards, two timecards, 2 time cards, 2 timecards