--- title: "Change Character Delay on Procare Touch Computer" slug: "change-character-delay-on-procare-touch-computer" updated: 2024-02-02T00:51:35Z published: 2024-02-02T00:51:35Z canonical: "www.procaresupport.com/change-character-delay-on-procare-touch-computer" --- > ## Documentation Index > Fetch the complete documentation index at: https://www.procaresupport.com/llms.txt > Use this file to discover all available pages before exploring further. # Change Character Delay on Procare Touch Computer This article explains how to change the character delay on Procare Touch Computers. This may be necessary to resolve issues with the built-in card reader not properly reading credit cards and other cards with a magnetic stripe. 1. Download and install the *MagSwipe Configuration Utility* on your Procare Touch Computer (link below). [Download MagSwipe Configuration Utility](https://s3.amazonaws.com/cdn.procaresoftware.com/support/MagSwipe_Config_v2.2_A.zip) 2. Reboot and run the *MagSwipe Configuration Utility*. 3. Choose Select *Reader Interface* (image below). ![image](https://s3.amazonaws.com/cdn.procaresoftware.com/pdfs/Support+Site+Images/Desktop/Hardware/Change+Character+Delay+on+Procare+Touch+Computer/Change+Character+Delay+on+Procare+Touch+Computer+-+122023+-+1.png) 4. Answer the question “*How is the reader connected to the host?*” by choosing the keyboard connection (item #4, image above). 5. Click *Continue* (image above). 6. Click on *Change Basic Reader Settings* (image below). ![image](https://s3.amazonaws.com/cdn.procaresoftware.com/pdfs/Support+Site+Images/Desktop/Hardware/Change+Character+Delay+on+Procare+Touch+Computer/Change+Character+Delay+on+Procare+Touch+Computer+-+122023+-+2.png) 7. Change the *Inter-Character Delay* to **10 ms** (image above). 8. Click on *Send to MSR* (image above). 9. Close the program and test the card reader. You may have to reboot for the changes to take effect.