---
title: "Keyless Entry: Overview, Parts List & Photo"
slug: "keyless-entry-overview-parts-list-photo"
updated: 2024-10-17T19:54:03Z
published: 2024-10-17T19:54:03Z
canonical: "www.procaresupport.com/keyless-entry-overview-parts-list-photo"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://www.procaresupport.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Keyless Entry: Overview, Parts List & Photo

### Purpose

The Keyless Entry System provides secure access to your child care facility by allowing entry only to authorized staff and families. See: [Keyless Entry Features](http://procaresoftware.com/products-and-services/check-in-solutions-overview/keyless-entry-system/)

## Hardware Installation & Wiring

The Keyless Entry hardware is connected to your electrically operated door (not supplied) and typically should be installed by a local electrician or door security company. See [Instructions and Wiring Diagram](https://s3.amazonaws.com/cdn.procaresoftware.com/pdfs/support/KES-Guide.pdf). **Note**: In a small number of cases it may be necessary to add an [Additional Relay](https://s3.amazonaws.com/cdn.procaresoftware.com/pdfs/support/kes-additional-relay.pdf).

**KES v1** ![KES 1.png](https://cdn.document360.io/cbafbd2c-42f8-485b-84e3-f3812fe8a596/Images/Documentation/KES%201.png)

**KES v2** ![KESv2_PartsPhoto3_Mark Boicey.png](https://cdn.document360.io/cbafbd2c-42f8-485b-84e3-f3812fe8a596/Images/Documentation/KESv2_PartsPhoto3_Mark%20Boicey.png)

## Software Overview

The Keyless Entry includes software allowing you to manage and transmit ID codes from Procare to the keypad, set up additional codes, restrict codes, and monitor codes as they are used to enter the building. Follow these basic steps:

- [Install Keyless Entry Software](/procare-desktop/docs/keyless-entry-installation)
- [Enable Software and Set Options](https://procaresupport.com/enable-keyless-entry-set-options/)
- [Assign Codes to People](https://procaresupport.com/keyless-entry-assign-codes/)
- [Transmit Codes, Additional Codes, Restrict Codes](https://procaresupport.com/keyless-entry-transmit-codes-to-keypad/)
- [Monitor Codes](https://procaresupport.com/keyless-entry-monitor-codes/) (optional)

## Parts List

**Included**: (1) keypad with attached RJ-45 pigtail (1) RJ-45 coupler (1) roll of RJ-45 flat cable (approx. 30′) or use your own CAT-5 cable (1) relay box (1) 2-chime doorbell (1) doorbell transformer (2) manual open buttons* (1) roll of 4-wire RJ-11 phone cable (approx. 100′) (1) RJ-11 to serial adapter (1) serial to USB adapter

***Note**: Wire one manual open button to the door control circuit. This allows a staff person inside to manually ‘buzz’ the door open so people without codes may enter the building. The second manual open is a spare.

**Not Included**: door strike, door strike power supply, disable key switch and their associated wiring. Obtain through a local security company or door supplier, etc.