Keyless Entry Installation
  • 09 Feb 2024
  • 1 Minute to read

Keyless Entry Installation

Article summary

How to install software for the Keyless Entry System.

Before You Begin

Software for the Keyless Entry System (KES) must be installed and run from a computer as follows:

  • Launch the Keyless Entry System Guide for installation and setup instructions.
  • The computer must be connected to a cable from the relay box by following the wiring instructions.
  • The computer must have Procare version 2019.2 or higher. Cloud customers always have the latest version. To check for the latest update on a non-Cloud version of Procare, begin at your Procare Home screen and click Utilities > Check for Online Update.
  • In a small number of installations, the onboard relay of the Keyless Entry System (KES) may be insufficient for the power requirements of the door strike system. See: Keyless Entry System: Additional Relay for more information.

Download & Install Keyless Entry Software

  1. Log on to your computer with local administrator privileges and close all programs, including Procare.
  2. Download
  3. When installation is complete, restart Procare.
    Note: If the Keyless Entry Software was previously installed on this computer, you must run the installation twice. The first time uninstalls the old software. The second time installs the new software. This would be the case if you were installing an updated version of the software.

Next Steps

Once the software is installed you’ll need to Enable It and Set Options.

Was this article helpful?