Activate New Procare Modules (or Additional Seats)
  • 20 Nov 2024
  • 1 Minute to read

Activate New Procare Modules (or Additional Seats)


Article summary

This article is for existing Procare customers who have purchased new software modules or additional seats. It explains how to update your Procare license and activate your new modules or seats

Update Your License & Activate Your Software (or Seats)

  1. From the Procare Home screen click Configuration > License. You must be logged on as a member of the System Supervisor User Group for this option to be visible.Image showing directions in article
    Image showing directions in article

  2. Click Update License (lower left).
    Image showing directions in article

  3. Your Installation Key and Module License should already be shown. Click Update Online.
    Image showing directions in article

Note: This will ensure you are properly licensed for the correct modules and number of seats.

  1. When the license update is complete click Save & Exit. You’ll return to the License Configuration screen.
    Image showing directions in article

  2. Place a check in the boxes for the new module(s) you are adding. If you have more than one location, be sure to mark the appropriate locations. For example, you may have two schools, but just one license for a particular module. If you are adding seats only (without any new modules), skip this step.
    Image showing directions in article

Hint: You can tell how many licenses you have left for each module under the Available Modules section (bottom of screen). Once each has been checked off the available modules will show zero.
Image showing directions in article

  1. Click Save > Exit. Your new modules have been activated.

Next Steps

Which module(s) do you want to learn?


Was this article helpful?